electric coil tilting turning tables series DWTE Werkzeugwechsel
Electrically operated Coil Turning Tilting Tables
Space-saving Type of Coil Tilting Table
The electrically driven coil turning tilting tables, offered by Seidel Handlingsysteme GmbH, mainly consist of a solidely welded machine body plus a very stable base. The electrically operated drive is integrated into the base and powers two extremely stable chains, which move the tilting unit between the horizontal and vertical final positions. During this the tilting unit is moved on 4 high-quality bearings.
The tilting unit itself is welded out of precisely produced steel parts with additional reinforcers. One side of the tilting unit does have a prism for pick up of the coil in vertical position, the other side does have a horizontal plate, for pick up of a coil in horizontal position, lying on a pallet or on cross beams. This side, in the middle, additionally can have a cut-out, so that the coil standing on the prism will be easily accessable for being taken away by crane or coil transport cart.
The distance between the prism and the plate, which is standing opposite to the prism within 90° angle, is big enough to put into or take out of this space a pallet or cross beams after having tilted the coil.
Small coils will be protected against dropping down by safety rods or optionally by safety swords.
The base of an electrically operated Coil Turning Tilting Table is positioned onto a turning base, with which the Coil Turning Tilting Table can do a 180° rotation during tilting. By this way it is achieved that for putting a coil onto the table and for taking away a tilted coil from the table one access side only will be needed. This is space-saving and additionally increases the work safety during tilting of the coil.
Electrically operated coil turning tilting tables mainly are used within the range of coil weight between 10 to 15 tons, but also are available for smaller or bigger coil weights. They are available for coil widths up to 1.500 mm as well as for 2.000 mm coil outside diameter. Coil turning tilting tables for bigger coil dimensions also can be offered upon request.
Electrically driven coil turning tilting tables do not need foundations or floor bolting.
If you will have questions regarding our coil turning tilting tables, we will be at your disposal at any time.
Please do not hesitate to contact us:
Seidel Handlingsysteme GmbH
|Phone:||+49 2156 419193|
|Fax:||+49 2156 4979325|